On the class lists: F (36), with population over 48 hours and no performance mark.
Players now0/ 200% full
7-day average0peak –
Rank#15,341top 69%
Last wipe8d agono schedule published
Next wipe–too few wipes seen yet
Subjects
Subject
Mark
Grade
Teacher's comment
Populationplayers against slots, 7-day average
0/ 100
F
A quiet classroom so far: 0 of 20 on average. Plenty of space to grow.
Standingrank on player hours
31/ 100
F
Working its way up from the back of the class: #15,341 on player hours.
Uptimehours on the list, last 48
unmarked
–
Not seen long enough to take a register.
Performanceserver fps, last 48 hours
unmarked
–
Did not answer our direct query, so this subject went unmarked.
Wipeskeeping the crowd after a wipe
unmarked
–
Too few wipes seen to mark this yet.
Momentumrank now against a week ago
42/ 100
F
Slipped a little: down 2,532 places this week. Nothing a good wipe can't fix.
A term to build on.
Strongest in momentum (F); population is the one to work on (F).
How it is marked: each subject is out of 100 from the figures on this page (population is the 7-day average against the slots, standing is 100 less the top share, uptime the hours of the last 48 it was seen, performance its fps against 60, wipes the share of its wipes that kept half their crowd, momentum its rank against a week ago with 50 for no change). The grade is their average: 95 and over is an A+, 90 an A, 85 an A−, 80 a B+, 75 a B, 70 a B−, 65 a C+, 60 a C, 55 a C−, 45 a D, under 45 an F.
Progress through the term
Its players, its performance and its rank, hour by hour and day by day. Dashed red lines are its wipes.
Players
No five-minute samples in the last two hours.
Every five minutes, from the Steam server list.
No hourly history yet.
Hourly average and peak, UTC.
AveragePeakWipe
Daily average and peak, UTC.
Server performance
This server has not answered a direct query in the last 48 hours.
This server has not answered a direct query in the last 48 hours.
This server has not answered a direct query in the last 48 hours.
Average fpsLowest fpsWipe
Most entitiesWipe
Most memory, MBWipe
Average fpsLowest fpsWipe
Most entitiesWipe
Most memory, MBWipe
Average fpsLowest fpsWipe
Most entitiesWipe
Most memory, MBWipe
48 hours: hourly readings. 30 to 90 days: one point a day, with the day's average and lowest fps, most entities and most memory, measured since 19 Oct. From asking the server directly; low fps and a climbing entity count mean lag.
Rank
daily · 1 is best
RankRank in region
Top 69% of all ranked servers. Ranked on player hours over the last seven days.
Attendance: the wipe record
1 wipe day in the last 16 weeks
MTWTFSS
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
··W····
····
JulAugSepOct
W wiped that day F the force wipe · today. From the wipes in the table below.
Wipe schedule
too few wipes seen yet
Not enough wipes seen yet to tell when the next one is. Every server wipes at the monthly force wipe.
wipe-day peak0players, last three wipes
The first 48 hours of its last wipes
Players each hour, from the hour of the wipe. The latest peaked at 0, 0 hours in.
Wipes
newest first
Wiped
Peak
Crowd
Lasted
Players before
Wed 21 Oct, 18:02 UTC8d ago
0
–
running
1
Peak: the most players in the first 48 hours. Crowd: whether every day of the wipe kept at least half that peak, or the day it fell below. A new world less than six hours after a wipe is a restart, not a wipe of its own.
Similar servers
classmates: the same kind of game, then region, group limit, rate and wipes
My Rust Server | ScalaCube leaves the region unpublished. Rust Server Score reports the location a server gives; it does not check where the machine actually is. Find it at 15.235.12.178:4747.
How dependable is My Rust Server | ScalaCube, and is it online at the moment?
At this moment, My Rust Server | ScalaCube is offline; the last time it was seen was 7 days 2 hours ago. It was up 17 of 168 hours over the last 7 full days, which is 10% of the time. It was first seen by Rust Server Score on 19 October 2026.
On what Rust version does My Rust Server | ScalaCube sit?
You will find My Rust Server | ScalaCube on Rust network protocol 2634 and build 167781, hosted on Linux. You need the same protocol to join; Steam takes care of updating your game.
Wipe cycle
When does My Rust Server | ScalaCube wipe, and how often?
My Rust Server | ScalaCube has not had enough wipes recorded to reveal its rhythm. On Thursday 5 November at 19:00 UTC the monthly force wipe resets every Rust server. The world it runs now was created 8 days.
What should you expect from wipe day on My Rust Server | ScalaCube?
The average peak on its recent wipes was 0 players. 0 hours after the latest wipe began, the crowd hit its peak.
Population
Where does My Rust Server | ScalaCube sit among Rust servers?
In the top 69% of all ranked servers, My Rust Server | ScalaCube sits at #15,341 for player hours over the last seven days.
Is My Rust Server | ScalaCube a busy server?
It has been 7 days 2 hours since My Rust Server | ScalaCube was last seen, and it is offline right now. Over the past seven days, the average player count was 0.
Lists and filters
How should you read the tags on My Rust Server | ScalaCube?
You'll see My Rust Server | ScalaCube tagged with gmrust (Game mode): Rust survival, played by the standard rules; mp20 (Max players): Its slot count is 20; ts8 (Group limit): A team can hold 8 at most, which is the game default; v2634 (Protocol): The game protocol is 2634, so your game must match that version to join; cs167781 (Build): This runs on build 167781; ptrak (Networking): This is RakNet: the network layer Rust normally uses; $r? (Region code): A region code is not set here in the browser, which picks them up from the server. The top of this page also shows its current players, any queue, and when the world was created, all from its tags.
Where does My Rust Server | ScalaCube appear in the Rust Server Score lists and filters?
These Rust Server Score lists count My Rust Server | ScalaCube among them: Best community servers, graded. You can find it under these server-list filters: Type: Community (not modded, not official) and No plugins at all; Group limit: 5 or more; Last wipe: In the last 2 weeks.
Map and rules
Which rules does My Rust Server | ScalaCube enforce, and what are its settings?
The name of My Rust Server | ScalaCube gives no gather rate. The group limit stays at the game's default of 8 players. It runs survival, gather and build and raid: the standard game. You can raid other players and fight them. You will see it in the Community section of the server browser, since it is a community server. You are covered by VAC, Valve's anti-cheat.
Which map is in play on My Rust Server | ScalaCube?
The game generates the procedural map on My Rust Server | ScalaCube at size 4,000 with seed 12345. You can look at the map on RustMaps from this page, since identical size and seed produce an identical map.
Getting in
How should you connect to My Rust Server | ScalaCube?
To connect, start Rust, press F1, and type client.connect 15.235.12.178:4747. Or click Launch Rust here, which launches Rust through Steam and joins you.
Server tags
what each one means
Published asmp20,ptrak,$r?,v2634,gmrust,cs167781,ts8
Game
gmrust
Game modeRust survival, played by the standard rules.
mp20
Max playersIts slot count is 20.
ts8
Group limitA team can hold 8 at most, which is the game default.
v2634
ProtocolThe game protocol is 2634, so your game must match that version to join.
cs167781
BuildThis runs on build 167781.
ptrak
NetworkingThis is RakNet: the network layer Rust normally uses.
$r?
Region codeA region code is not set here.
Players now (cp), the queue (qp) and the wipe time (born) are in the tag string too; they change every few minutes and are shown at the top of the page. Flag meanings are Facepunch's.
A term to build on. Strongest in momentum (F); population is the one to work on (F).