On the class lists: F (44), with population over 48 hours and no performance mark.
Players now0/ 50% full
7-day average0peak –
Rank#15,262top 69%
Last wipe12d agono schedule published
Next wipe–too few wipes seen yet
Subjects
Subject
Mark
Grade
Teacher's comment
Populationplayers against slots, 7-day average
0/ 100
F
A quiet classroom so far: 0 of 5 on average. Plenty of space to grow.
Standingrank on player hours
31/ 100
F
Working its way up from the back of the class: #15,262 on player hours.
Uptimehours on the list, last 48
94/ 100
A
Good attendance: on the list 45 of the last 48 hours.
Performanceserver fps, last 48 hours
100/ 100
A+
Runs smoothly: 245 server fps on average.
Wipeskeeping the crowd after a wipe
unmarked
–
Too few wipes seen to mark this yet.
Momentumrank now against a week ago
50/ 100
D
Holding steady: down 137 places this week.
A fair term, with more to come.
Strongest in performance (A+); population is the one to work on (F).
How it is marked: each subject is out of 100 from the figures on this page (population is the 7-day average against the slots, standing is 100 less the top share, uptime the hours of the last 48 it was seen, performance its fps against 60, wipes the share of its wipes that kept half their crowd, momentum its rank against a week ago with 50 for no change). The grade is their average: 95 and over is an A+, 90 an A, 85 an A−, 80 a B+, 75 a B, 70 a B−, 65 a C+, 60 a C, 55 a C−, 45 a D, under 45 an F.
Progress through the term
Its players, its performance and its rank, hour by hour and day by day. Dashed red lines are its wipes.
Players
Every five minutes, from the Steam server list.
AveragePeak
Hourly average and peak, UTC.
AveragePeakWipe
Daily average and peak, UTC.
Server performance
Average fpsLowest fpsWipe
Most entitiesWipe
Most memory, MBWipe
Average fpsLowest fpsWipe
Most entitiesWipe
Most memory, MBWipe
Average fpsLowest fpsWipe
Most entitiesWipe
Most memory, MBWipe
48 hours: hourly readings. 30 to 90 days: one point a day, with the day's average and lowest fps, most entities and most memory, measured since 16 Oct. From asking the server directly; low fps and a climbing entity count mean lag.
Rank
daily · 1 is best
RankRank in region
Top 69% of all ranked servers. Ranked on player hours over the last seven days.
Attendance: the wipe record
1 wipe day in the last 16 weeks
MTWTFSS
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
·····W·
·······
·····
JulAugSepOct
W wiped that day F the force wipe · today. From the wipes in the table below.
Wipe schedule
too few wipes seen yet
Not enough wipes seen yet to tell when the next one is. Every server wipes at the monthly force wipe.
wipe-day peak0players, last three wipes
The first 48 hours of its last wipes
Players each hour, from the hour of the wipe. The latest peaked at 0, 0 hours in.
Wipes
newest first
Wiped
Peak
Crowd
Lasted
Players before
Sat 17 Oct, 16:24 UTC12d ago
0
–
running
0
Peak: the most players in the first 48 hours. Crowd: whether every day of the wipe kept at least half that peak, or the day it fell below. A new world less than six hours after a wipe is a restart, not a wipe of its own.
Similar servers
classmates: the same kind of game, then region, group limit, rate and wipes
No region is published for A Shockbyte Rust Server. The location shown on Rust Server Score comes from the server itself, not from a lookup of the machine. You can connect at 157.85.93.94:28015.
How dependable is A Shockbyte Rust Server, and is it online at the moment?
The server is up: A Shockbyte Rust Server is online now. According to its reported uptime, the last restart was about 12 days 5 hours ago. For the last 7 full days, it was up 143 of 168 hours, or 85% of the time. On 16 October 2026, Rust Server Score saw it for the first time.
Is A Shockbyte Rust Server smooth to play on?
It averaged 245 server fps over the last 48 hours, with a low of 228. At its peak, it held 8,161 entities, including buildings, deployables and all else in the world. Up to 3,200 MB of memory was used. Lag is what players feel when fps is low and the entity count climbs.
Which Rust version is A Shockbyte Rust Server running?
You will find A Shockbyte Rust Server on Rust network protocol 2634 and build 167781, hosted on Linux. Steam updates your game for you, but you need the same protocol to join.
Wipe cycle
When does A Shockbyte Rust Server wipe, and how often?
A Shockbyte Rust Server has not had enough wipes recorded to reveal its rhythm. Next up is Thursday 5 November at 19:00 UTC, when the monthly force wipe takes every Rust server with it. The world it runs now was created 12 days 7 hours.
What happens on A Shockbyte Rust Server when wipe day arrives?
Across its recent wipes, the busiest moments averaged 0 players. The crowd on the latest wipe was largest 0 hours after it began.
Player numbers
Where does A Shockbyte Rust Server place in the wider field of Rust servers?
In the top 69% of all ranked servers, A Shockbyte Rust Server sits at #15,262 for player hours over the last seven days.
Is A Shockbyte Rust Server a busy server?
Right now, 0 players are on A Shockbyte Rust Server, which has 5 slots. Over the past seven days, the average player count was 0.
Tags and filters
How should you read the tags on A Shockbyte Rust Server?
gmrust (Game mode): Rust survival, played by the standard rules; mp5 (Max players): 5 slots are available; ts8 (Group limit): Teams are capped at 8, the game's standard setting; v2634 (Protocol): To get in, your game needs to be on the same version: the protocol is 2634; cs167781 (Build): The game build is 167781; ptrak (Networking): The network layer is RakNet, standard for the game; $r? (Region code): There is no region code on this server are the tags A Shockbyte Rust Server publishes, and the game's server browser reads them. Its tags also carry today's player number, the queue length and the world's creation time, which you'll find at the top of this page.
Which Rust Server Score filters and lists feature A Shockbyte Rust Server?
These Rust Server Score lists count A Shockbyte Rust Server among them: Best community servers, graded. It shows under the following filters on the server list: Type: Community (not modded, not official) and No plugins at all; Group limit: 5 or more; Last wipe: In the last 2 weeks.
Map and rules
Which rules does A Shockbyte Rust Server enforce, and what are its settings?
Nothing in the name of A Shockbyte Rust Server states a gather rate. The default of 8 players applies as the group cap. It runs survival, gather, build and raid, as in the standard game. Fighting and raiding between players are both allowed. You will see it in the Community section of the server browser, since it is a community server. The server runs Valve's anti-cheat, VAC.
A Shockbyte Rust Server runs which map?
The game generates the procedural map on A Shockbyte Rust Server at size 1,500 with seed 50000. You can look at the map on RustMaps from this page, since identical size and seed produce an identical map.
Connecting
How should you connect to A Shockbyte Rust Server?
To connect, start Rust, press F1, and type client.connect 157.85.93.94:28015. Or click Launch Rust here, which launches Rust through Steam and joins you.
Server tags
what each one means
Published asmp5,ptrak,$r?,v2634,gmrust,cs167781,ts8
Game
gmrust
Game modeRust survival, played by the standard rules.
mp5
Max players5 slots are available.
ts8
Group limitTeams are capped at 8, the game's standard setting.
v2634
ProtocolTo get in, your game needs to be on the same version: the protocol is 2634.
cs167781
BuildThe game build is 167781.
ptrak
NetworkingThe network layer is RakNet, standard for the game.
$r?
Region codeThere is no region code on this server.
Players now (cp), the queue (qp) and the wipe time (born) are in the tag string too; they change every few minutes and are shown at the top of the page. Flag meanings are Facepunch's.
A fair term, with more to come. Strongest in performance (A+); population is the one to work on (F).