On the class lists: F (38), with population over 48 hours and no performance mark.
Players now0/ 200% full
7-day average0peak –
Rank#15,338top 69%
Last wipe8d agono schedule published
Next wipe–too few wipes seen yet
Subjects
Subject
Mark
Grade
Teacher's comment
Populationplayers against slots, 7-day average
0/ 100
F
A quiet classroom so far: 0 of 20 on average. Plenty of space to grow.
Standingrank on player hours
31/ 100
F
Working its way up from the back of the class: #15,338 on player hours.
Uptimehours on the list, last 48
unmarked
–
Not seen long enough to take a register.
Performanceserver fps, last 48 hours
unmarked
–
Did not answer our direct query, so this subject went unmarked.
Wipeskeeping the crowd after a wipe
unmarked
–
Too few wipes seen to mark this yet.
Momentumrank now against a week ago
46/ 100
D
Slipped a little: down 1,257 places this week. Nothing a good wipe can't fix.
A term to build on.
Strongest in momentum (D); population is the one to work on (F).
How it is marked: each subject is out of 100 from the figures on this page (population is the 7-day average against the slots, standing is 100 less the top share, uptime the hours of the last 48 it was seen, performance its fps against 60, wipes the share of its wipes that kept half their crowd, momentum its rank against a week ago with 50 for no change). The grade is their average: 95 and over is an A+, 90 an A, 85 an A−, 80 a B+, 75 a B, 70 a B−, 65 a C+, 60 a C, 55 a C−, 45 a D, under 45 an F.
Progress through the term
Its players, its performance and its rank, hour by hour and day by day. Dashed red lines are its wipes.
Players
No five-minute samples in the last two hours.
Every five minutes, from the Steam server list.
No hourly history yet.
Hourly average and peak, UTC.
AveragePeakWipe
Daily average and peak, UTC.
Server performance
This server has not answered a direct query in the last 48 hours.
This server has not answered a direct query in the last 48 hours.
This server has not answered a direct query in the last 48 hours.
Average fpsLowest fpsWipe
Most entitiesWipe
Most memory, MBWipe
Average fpsLowest fpsWipe
Most entitiesWipe
Most memory, MBWipe
Average fpsLowest fpsWipe
Most entitiesWipe
Most memory, MBWipe
48 hours: hourly readings. 30 to 90 days: one point a day, with the day's average and lowest fps, most entities and most memory, measured since 20 Oct. From asking the server directly; low fps and a climbing entity count mean lag.
Rank
daily · 1 is best
RankRank in region
Top 69% of all ranked servers. Ranked on player hours over the last seven days.
Attendance: the wipe record
1 wipe day in the last 16 weeks
MTWTFSS
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
··W····
····
JulAugSepOct
W wiped that day F the force wipe · today. From the wipes in the table below.
Wipe schedule
too few wipes seen yet
Not enough wipes seen yet to tell when the next one is. Every server wipes at the monthly force wipe.
wipe-day peak1players, last three wipes
The first 48 hours of its last wipes
Players each hour, from the hour of the wipe. The latest peaked at 1, 6 hours in.
Wipes
newest first
Wiped
Peak
Crowd
Lasted
Players before
Wed 21 Oct, 08:50 UTC8d ago
1
–
running
0
Peak: the most players in the first 48 hours. Crowd: whether every day of the wipe kept at least half that peak, or the day it fell below. A new world less than six hours after a wipe is a restart, not a wipe of its own.
Similar servers
classmates: the same kind of game, then region, group limit, rate and wipes
Which region is My Rust Server | ScalaCube based in?
My Rust Server | ScalaCube leaves the region unpublished. Rust Server Score takes the server's word for its location and does not trace the hardware. 198.244.179.144:4841 is the address to use.
Is My Rust Server | ScalaCube up, and how steady is its uptime?
At this moment, My Rust Server | ScalaCube is offline; the last time it was seen was 7 days 6 hours ago. It was up 9 of 168 hours over the last 7 full days, which is 5% of the time. On 20 October 2026, Rust Server Score saw it for the first time.
On what Rust version does My Rust Server | ScalaCube sit?
Rust network protocol 2634 and build 167781 on Linux is what My Rust Server | ScalaCube runs. Steam updates your game for you, but you need the same protocol to join.
Wipe cycle
When does My Rust Server | ScalaCube wipe, and how often?
There are too few wipes on record for My Rust Server | ScalaCube to show a rhythm. The monthly force wipe reaches every Rust server, and the next one lands on Thursday 5 November at 19:00 UTC. The world it runs now was created 8 days 5 hours.
What should you expect from wipe day on My Rust Server | ScalaCube?
The average peak on its recent wipes was 1 players. Peak numbers came 6 hours into the latest wipe.
Population
Where does My Rust Server | ScalaCube sit among Rust servers?
Over the last seven days, My Rust Server | ScalaCube has #15,338 for player hours, in the top 69% of all ranked servers.
Is My Rust Server | ScalaCube a busy server?
It has been 7 days 6 hours since My Rust Server | ScalaCube was last seen, and it is offline right now. Over the past seven days, the average player count was 0.
Tags
How should you read the tags on My Rust Server | ScalaCube?
The game's browser takes its cue from the tags My Rust Server | ScalaCube has set: gmrust (Game mode): Rust survival, played by the standard rules; mp20 (Max players): The server holds 20 slots; ts8 (Group limit): Teams are capped at 8, the game's standard setting; v2634 (Protocol): The game protocol is 2634, so your game must match that version to join; cs167781 (Build): This runs on build 167781; ptrak (Networking): This is RakNet: the network layer Rust normally uses; $r? (Region code): There is no region code on this server. At the top of the page you'll see the live player count, the queue and the world's age, taken from the tags.
Which Rust Server Score filters and lists feature My Rust Server | ScalaCube?
Rust Server Score lists that include My Rust Server | ScalaCube: Best community servers, graded. It shows under the following filters on the server list: Type: Community (not modded, not official) and No plugins at all; Group limit: 5 or more; Last wipe: In the last 2 weeks.
Server rules
What settings and rules apply on My Rust Server | ScalaCube?
Nothing in the name of My Rust Server | ScalaCube states a gather rate. The default of 8 players applies as the group cap. It runs survival, gather and build and raid: the standard game. Raiding and PvP are both permitted. The server browser lists it under Community, as a community server. The server runs Valve's anti-cheat, VAC.
Which map is in play on My Rust Server | ScalaCube?
A procedural map of size 4,000 and seed 12345, generated by the game, is what My Rust Server | ScalaCube runs. A matching size and seed produce the same map, viewable on RustMaps from this page.
How to join
How should you connect to My Rust Server | ScalaCube?
To connect, start Rust, press F1, and type client.connect 198.244.179.144:4841. Or click Launch Rust here, which launches Rust through Steam and joins you.
Server tags
what each one means
Published asmp20,ptrak,$r?,v2634,gmrust,cs167781,ts8
Game
gmrust
Game modeRust survival, played by the standard rules.
mp20
Max playersThe server holds 20 slots.
ts8
Group limitTeams are capped at 8, the game's standard setting.
v2634
ProtocolThe game protocol is 2634, so your game must match that version to join.
cs167781
BuildThis runs on build 167781.
ptrak
NetworkingThis is RakNet: the network layer Rust normally uses.
$r?
Region codeThere is no region code on this server.
Players now (cp), the queue (qp) and the wipe time (born) are in the tag string too; they change every few minutes and are shown at the top of the page. Flag meanings are Facepunch's.
A term to build on. Strongest in momentum (D); population is the one to work on (F).