Working its way up from the back of the class: #15,330 on player hours.
Uptimehours on the list, last 48
unmarked
–
Not seen long enough to take a register.
Performanceserver fps, last 48 hours
unmarked
–
Did not answer our direct query, so this subject went unmarked.
Wipeskeeping the crowd after a wipe
unmarked
–
Too few wipes seen to mark this yet.
Momentumrank now against a week ago
52/ 100
D
Moving up: up 519 places this week.
A term to build on.
Strongest in momentum (D); standing is the one to work on (F).
How it is marked: each subject is out of 100 from the figures on this page (population is the 7-day average against the slots, standing is 100 less the top share, uptime the hours of the last 48 it was seen, performance its fps against 60, wipes the share of its wipes that kept half their crowd, momentum its rank against a week ago with 50 for no change). The grade is their average: 95 and over is an A+, 90 an A, 85 an A−, 80 a B+, 75 a B, 70 a B−, 65 a C+, 60 a C, 55 a C−, 45 a D, under 45 an F.
Progress through the term
Its players, its performance and its rank, hour by hour and day by day. Dashed red lines are its wipes.
Players
No five-minute samples in the last two hours.
Every five minutes, from the Steam server list.
No hourly history yet.
Hourly average and peak, UTC.
AveragePeakWipe
Daily average and peak, UTC.
Server performance
This server has not answered a direct query in the last 48 hours.
This server has not answered a direct query in the last 48 hours.
This server has not answered a direct query in the last 48 hours.
Average fpsLowest fpsWipe
Most entitiesWipe
Most memory, MBWipe
Average fpsLowest fpsWipe
Most entitiesWipe
Most memory, MBWipe
Average fpsLowest fpsWipe
Most entitiesWipe
Most memory, MBWipe
48 hours: hourly readings. 30 to 90 days: one point a day, with the day's average and lowest fps, most entities and most memory, measured since 17 Oct. From asking the server directly; low fps and a climbing entity count mean lag.
Rank
daily · 1 is best
RankRank in region
Top 70% of all ranked servers. Ranked on player hours over the last seven days.
Attendance: the wipe record
0 wipe days in the last 16 weeks
MTWTFSS
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
··
JulAugSepOct
W wiped that day F the force wipe · today. From the wipes in the table below.
Wipe schedule
Not enough wipes seen yet to tell when the next one is. Every server wipes at the monthly force wipe.
Wipes
newest first
Wiped
Peak
Crowd
Lasted
Players before
No wipe seen yet.
Peak: the most players in the first 48 hours. Crowd: whether every day of the wipe kept at least half that peak, or the day it fell below. A new world less than six hours after a wipe is a restart, not a wipe of its own.
Similar servers
classmates: the same kind of game, then region, group limit, rate and wipes
In what location does HelvetiCore | Vanilla | Solo Only | Monthly sit?
You'll find no region listed by HelvetiCore | Vanilla | Solo Only | Monthly. The location shown on Rust Server Score comes from the server itself, not from a lookup of the machine. 31.97.35.120:28015 is the address to use.
How reliable is HelvetiCore | Vanilla | Solo Only | Monthly, and is it up?
At this moment, HelvetiCore | Vanilla | Solo Only | Monthly is offline; the last time it was seen was 9 days 22 hours ago. It was up 0% of the time over the last 7 full days, 0 of 168 hours. It was first seen by Rust Server Score on 17 October 2026.
On what Rust version does HelvetiCore | Vanilla | Solo Only | Monthly sit?
The server HelvetiCore | Vanilla | Solo Only | Monthly is on Rust network protocol 2634 and build 167781 under Linux. You need the same protocol to join; Steam takes care of updating your game.
Wipe cycle
When does HelvetiCore | Vanilla | Solo Only | Monthly wipe, and how often?
HelvetiCore | Vanilla | Solo Only | Monthly has not had enough wipes recorded to reveal its rhythm. The monthly force wipe reaches every Rust server, and the next one lands on Thursday 5 November at 19:00 UTC. 10 days 9 hours have passed since this world was made.
Player numbers
Where does HelvetiCore | Vanilla | Solo Only | Monthly place in the wider field of Rust servers?
In the top 70% of all ranked servers, HelvetiCore | Vanilla | Solo Only | Monthly sits at #15,330 for player hours over the last seven days.
Is HelvetiCore | Vanilla | Solo Only | Monthly a busy server?
HelvetiCore | Vanilla | Solo Only | Monthly is offline at the moment; the last time it was seen was 9 days 22 hours ago.
Tags and filters
How should you read the tags on HelvetiCore | Vanilla | Solo Only | Monthly?
gmrust (Game mode): Survival in the standard Rust style; mp100 (Max players): The server holds 100 slots; ts8 (Group limit): Teams are capped at 8, the game's standard setting; v2634 (Protocol): The game protocol is 2634, so your game must match that version to join; cs167781 (Build): The game build is 167781; ptrak (Networking): The network layer is RakNet, standard for the game; $r? (Region code): No region code has been set are the tags HelvetiCore | Vanilla | Solo Only | Monthly publishes, and the game's server browser reads them. At the top of the page you'll see the live player count, the queue and the world's age, taken from the tags.
Where does HelvetiCore | Vanilla | Solo Only | Monthly appear in the Rust Server Score lists and filters?
Rust Server Score lists that include HelvetiCore | Vanilla | Solo Only | Monthly: Best community servers, graded. You can find it under these server-list filters: Type: Community (not modded, not official) and No plugins at all; Group limit: 5 or more; Last wipe: In the last 2 weeks.
Map and rules
What settings and rules apply on HelvetiCore | Vanilla | Solo Only | Monthly?
Nothing in the name of HelvetiCore | Vanilla | Solo Only | Monthly states a gather rate. With no change from the game default, groups take up to 8 players. survival is the mode here, gather and build and raid: the standard game. Raiding and PvP are both permitted. The server browser lists it under Community, as a community server. VAC, Valve's anti-cheat, is enabled.
HelvetiCore | Vanilla | Solo Only | Monthly runs which map?
The game generates the procedural map on HelvetiCore | Vanilla | Solo Only | Monthly at size 3,800 with seed 6738. A matching size and seed produce the same map, viewable on RustMaps from this page.
Connecting
What is the way to join HelvetiCore | Vanilla | Solo Only | Monthly?
To connect, start Rust, press F1, and type client.connect 31.97.35.120:28015. Or click Launch Rust here, which launches Rust through Steam and joins you.
Server tags
what each one means
Published asmp100,ptrak,$r?,v2634,gmrust,cs167781,ts8
Game
gmrust
Game modeSurvival in the standard Rust style.
mp100
Max playersThe server holds 100 slots.
ts8
Group limitTeams are capped at 8, the game's standard setting.
v2634
ProtocolThe game protocol is 2634, so your game must match that version to join.
cs167781
BuildThe game build is 167781.
ptrak
NetworkingThe network layer is RakNet, standard for the game.
$r?
Region codeNo region code has been set.
Players now (cp), the queue (qp) and the wipe time (born) are in the tag string too; they change every few minutes and are shown at the top of the page. Flag meanings are Facepunch's.
A term to build on. Strongest in momentum (D); standing is the one to work on (F).