On the class lists: D (45), with population over 48 hours and no performance mark.
Players now2/ 504% full
7-day average1peak 2
Rank#6,189top 28%
Last wipe5d agono schedule published
Next wipe–too few wipes seen yet
Subjects
Subject
Mark
Grade
Teacher's comment
Populationplayers against slots, 7-day average
2/ 100
F
A quiet classroom so far: 1 of 50 on average. Plenty of space to grow.
Standingrank on player hours
72/ 100
B−
Holds a respectable place: #6,189 on player hours.
Uptimehours on the list, last 48
4/ 100
F
Attendance needs work: on the list only 2 of the last 48 hours.
Performanceserver fps, last 48 hours
100/ 100
A+
Runs smoothly: 105 server fps on average.
Wipeskeeping the crowd after a wipe
unmarked
–
Too few wipes seen to mark this yet.
Momentumrank now against a week ago
100/ 100
A+
Climbing fast: up 8,270 places this week.
A fair term, with more to come.
Strongest in performance (A+); population is the one to work on (F).
How it is marked: each subject is out of 100 from the figures on this page (population is the 7-day average against the slots, standing is 100 less the top share, uptime the hours of the last 48 it was seen, performance its fps against 60, wipes the share of its wipes that kept half their crowd, momentum its rank against a week ago with 50 for no change). The grade is their average: 95 and over is an A+, 90 an A, 85 an A−, 80 a B+, 75 a B, 70 a B−, 65 a C+, 60 a C, 55 a C−, 45 a D, under 45 an F.
Progress through the term
Its players, its performance and its rank, hour by hour and day by day. Dashed red lines are its wipes.
Players
No five-minute samples in the last two hours.
Every five minutes, from the Steam server list.
AveragePeak
Hourly average and peak, UTC.
AveragePeakWipe
Daily average and peak, UTC.
Server performance
This server has not answered a direct query in the last 48 hours.
This server has not answered a direct query in the last 48 hours.
This server has not answered a direct query in the last 48 hours.
Average fpsLowest fpsWipe
Most entitiesWipe
Most memory, MBWipe
Average fpsLowest fpsWipe
Most entitiesWipe
Most memory, MBWipe
Average fpsLowest fpsWipe
Most entitiesWipe
Most memory, MBWipe
48 hours: hourly readings. 30 to 90 days: one point a day, with the day's average and lowest fps, most entities and most memory, measured since 23 Oct. From asking the server directly; low fps and a climbing entity count mean lag.
Rank
daily · 1 is best
RankRank in region
Top 28% of all ranked servers. Ranked on player hours over the last seven days.
Attendance: the wipe record
1 wipe day in the last 16 weeks
MTWTFSS
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
····W··
····
JulAugSepOct
W wiped that day F the force wipe · today. From the wipes in the table below.
Wipe schedule
too few wipes seen yet
Not enough wipes seen yet to tell when the next one is. Every server wipes at the monthly force wipe.
wipe-day peak2players, last three wipes
The first 48 hours of its last wipes
Players each hour, from the hour of the wipe. The latest peaked at 2, 2 hours in.
Wipes
newest first
Wiped
Peak
Crowd
Lasted
Players before
Fri 23 Oct, 18:13 UTC5d ago
2
–
running
1
Peak: the most players in the first 48 hours. Crowd: whether every day of the wipe kept at least half that peak, or the day it fell below. A new world less than six hours after a wipe is a restart, not a wipe of its own.
Similar servers
classmates: the same kind of game, then region, group limit, rate and wipes
You'll find no region listed by BenPak. Rust Server Score reports the location a server gives; it does not check where the machine actually is. You can connect at 77.240.224.61:28015.
Is BenPak up, and how steady is its uptime?
At this moment, BenPak is offline; the last time it was seen was 40 hours ago. About 1 hours ago, it restarted, based on the uptime it reports. It was up 21 of 144 hours over the last 6 full days, which is 15% of the time. The first sighting by Rust Server Score was on 22 October 2026.
Does BenPak perform well?
The average over the last 48 hours was 105 server fps, and it never went below 105. Up to 96,517 entities were in the world, covering buildings, deployables and the rest. Up to 2,124 MB of memory was used. Players feel lag when fps drops and entities pile up.
On what Rust version does BenPak sit?
You will find BenPak on Rust network protocol 2635 and build 168909, hosted on Windows. Steam updates your game for you, but you need the same protocol to join.
Wipe cycle
How frequently does BenPak wipe its map?
BenPak has not had enough wipes recorded to reveal its rhythm. Next up is Thursday 5 November at 19:00 UTC, when the monthly force wipe takes every Rust server with it. The world it runs now was created 5 days 9 hours.
What happens on BenPak when wipe day arrives?
The average peak on its recent wipes was 2 players. Peak numbers came 2 hours into the latest wipe.
Player numbers
Where does BenPak place in the wider field of Rust servers?
In the top 28% of all ranked servers, BenPak sits at #6,189 for player hours over the last seven days.
What does the population on BenPak look like?
The last sighting of BenPak was 40 hours ago, and it is offline right now. Averaging 1 players over seven days, it peaked at 2. The busiest time in the last 48 hours was 11:00 UTC, with an average of 2 players.
Lists and filters
How should you read the tags on BenPak?
gmrust (Game mode): Survival in the standard Rust style; mp50 (Max players): Its slot count is 50; ts8 (Group limit): Teams are capped at 8, the game's standard setting; v2635 (Protocol): Join only if your game runs protocol 2635; cs168909 (Build): The game build is 168909; ptrak (Networking): The network layer is RakNet, standard for the game; $r? (Region code): No region code has been set are the tags BenPak publishes, and the game's server browser reads them. At the top of the page you'll see the live player count, the queue and the world's age, taken from the tags.
Where does BenPak appear in the Rust Server Score lists and filters?
These Rust Server Score lists count BenPak among them: Best community servers, graded. These filters bring it up on the server list: Type: Community (not modded, not official) and No plugins at all; Group limit: 5 or more; Last wipe: In the last week.
Rules and settings
Which rules does BenPak enforce, and what are its settings?
The name of BenPak gives no gather rate. The group limit stays at the game's default of 8 players. You get survival here, gather and build and raid: the standard game. Fighting and raiding between players are both allowed. The server browser lists it under Community, as a community server. VAC, Valve's anti-cheat, is enabled.
Which map is in play on BenPak?
A procedural map of size 4,200 and seed 987654321, generated by the game, is what BenPak runs. A matching size and seed produce the same map, viewable on RustMaps from this page.
Getting in
How should you connect to BenPak?
Enter client.connect 77.240.224.61:28015 in the console after pressing F1 in Rust. Or use Launch Rust on this page to open Rust through Steam and connect automatically.
Server tags
what each one means
Published asmp50,ptrak,$r?,v2635,gmrust,cs168909,ts8
Game
gmrust
Game modeSurvival in the standard Rust style.
mp50
Max playersIts slot count is 50.
ts8
Group limitTeams are capped at 8, the game's standard setting.
v2635
ProtocolJoin only if your game runs protocol 2635.
cs168909
BuildThe game build is 168909.
ptrak
NetworkingThe network layer is RakNet, standard for the game.
$r?
Region codeNo region code has been set.
Players now (cp), the queue (qp) and the wipe time (born) are in the tag string too; they change every few minutes and are shown at the top of the page. Flag meanings are Facepunch's.
A fair term, with more to come. Strongest in performance (A+); population is the one to work on (F).