On the class lists: F (40), with population over 48 hours and no performance mark.
Players now0/ 200% full
7-day average0peak –
Rank#15,344top 69%
Last wipe7d agono schedule published
Next wipe–too few wipes seen yet
Subjects
Subject
Mark
Grade
Teacher's comment
Populationplayers against slots, 7-day average
0/ 100
F
A quiet classroom so far: 0 of 20 on average. Plenty of space to grow.
Standingrank on player hours
31/ 100
F
Working its way up from the back of the class: #15,344 on player hours.
Uptimehours on the list, last 48
unmarked
–
Not seen long enough to take a register.
Performanceserver fps, last 48 hours
unmarked
–
Did not answer our direct query, so this subject went unmarked.
Wipeskeeping the crowd after a wipe
unmarked
–
Too few wipes seen to mark this yet.
Momentumrank now against a week ago
49/ 100
D
Slipped a little: down 219 places this week. Nothing a good wipe can't fix.
A term to build on.
Strongest in momentum (D); population is the one to work on (F).
How it is marked: each subject is out of 100 from the figures on this page (population is the 7-day average against the slots, standing is 100 less the top share, uptime the hours of the last 48 it was seen, performance its fps against 60, wipes the share of its wipes that kept half their crowd, momentum its rank against a week ago with 50 for no change). The grade is their average: 95 and over is an A+, 90 an A, 85 an A−, 80 a B+, 75 a B, 70 a B−, 65 a C+, 60 a C, 55 a C−, 45 a D, under 45 an F.
Progress through the term
Its players, its performance and its rank, hour by hour and day by day. Dashed red lines are its wipes.
Players
No five-minute samples in the last two hours.
Every five minutes, from the Steam server list.
No hourly history yet.
Hourly average and peak, UTC.
AveragePeakWipe
Daily average and peak, UTC.
Server performance
This server has not answered a direct query in the last 48 hours.
This server has not answered a direct query in the last 48 hours.
This server has not answered a direct query in the last 48 hours.
Average fpsLowest fpsWipe
Most entitiesWipe
Most memory, MBWipe
Average fpsLowest fpsWipe
Most entitiesWipe
Most memory, MBWipe
Average fpsLowest fpsWipe
Most entitiesWipe
Most memory, MBWipe
48 hours: hourly readings. 30 to 90 days: one point a day, with the day's average and lowest fps, most entities and most memory, measured since 21 Oct. From asking the server directly; low fps and a climbing entity count mean lag.
Rank
daily · 1 is best
RankRank in region
Top 69% of all ranked servers. Ranked on player hours over the last seven days.
Attendance: the wipe record
1 wipe day in the last 16 weeks
MTWTFSS
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
···W···
····
JulAugSepOct
W wiped that day F the force wipe · today. From the wipes in the table below.
Wipe schedule
too few wipes seen yet
Not enough wipes seen yet to tell when the next one is. Every server wipes at the monthly force wipe.
wipe-day peak0players, last three wipes
The first 48 hours of its last wipes
Players each hour, from the hour of the wipe. The latest peaked at 0, 0 hours in.
Wipes
newest first
Wiped
Peak
Crowd
Lasted
Players before
Thu 22 Oct, 14:14 UTC7d ago
0
–
running
0
Peak: the most players in the first 48 hours. Crowd: whether every day of the wipe kept at least half that peak, or the day it fell below. A new world less than six hours after a wipe is a restart, not a wipe of its own.
Similar servers
classmates: the same kind of game, then region, group limit, rate and wipes
No region is published for My Rust Server | ScalaCube. Rust Server Score takes the server's word for its location and does not trace the hardware. 88.198.230.54:2712 is the address to use.
How dependable is My Rust Server | ScalaCube, and is it online at the moment?
At this moment, My Rust Server | ScalaCube is offline; the last time it was seen was 7 days 2 hours ago. For the last 7 full days, it was up 16 of 168 hours, or 10% of the time. It was first seen by Rust Server Score on 21 October 2026.
On what Rust version does My Rust Server | ScalaCube sit?
Rust network protocol 2634 and build 167781 on Linux is what My Rust Server | ScalaCube runs. You need the same protocol to join; Steam takes care of updating your game.
Wipe schedule
When does My Rust Server | ScalaCube wipe, and how often?
The record holds too few of My Rust Server | ScalaCube's wipes to tell its rhythm. The monthly force wipe reaches every Rust server, and the next one lands on Thursday 5 November at 19:00 UTC. The world it runs now was created 7 days 4 hours.
What happens on My Rust Server | ScalaCube when wipe day arrives?
Across its recent wipes, the busiest moments averaged 0 players. 0 hours after the latest wipe began, the crowd hit its peak.
Population
Where does My Rust Server | ScalaCube sit among Rust servers?
Over the last seven days, My Rust Server | ScalaCube has #15,344 for player hours, in the top 69% of all ranked servers.
Is My Rust Server | ScalaCube a busy server?
My Rust Server | ScalaCube is offline at the moment; the last time it was seen was 7 days 2 hours ago. A seven-day average of 0 players applies here.
Lists and filters
How should you read the tags on My Rust Server | ScalaCube?
gmrust (Game mode): Rust survival, played by the standard rules; mp20 (Max players): The server holds 20 slots; ts8 (Group limit): Teams are capped at 8, the game's standard setting; v2634 (Protocol): To get in, your game needs to be on the same version: the protocol is 2634; cs167781 (Build): Build number: 167781; ptrak (Networking): The network layer is RakNet, standard for the game; $r? (Region code): A region code is not set here are the tags My Rust Server | ScalaCube publishes, and the game's server browser reads them. The top of this page also shows its current players, any queue, and when the world was created, all from its tags.
Which Rust Server Score filters and lists feature My Rust Server | ScalaCube?
These Rust Server Score lists count My Rust Server | ScalaCube among them: Best community servers, graded. It shows under the following filters on the server list: Type: Community (not modded, not official) and No plugins at all; Group limit: 5 or more; Last wipe: In the last 2 weeks.
Map and rules
How is My Rust Server | ScalaCube set up, and what rules does it keep?
You will find no gather rate in the name of My Rust Server | ScalaCube. With no change from the game default, groups take up to 8 players. You get survival here, gather, build and raid, as in the standard game. Raiding and PvP are both permitted. Under Community in the server browser you will find this community server. You are covered by VAC, Valve's anti-cheat.
Can you tell me which map My Rust Server | ScalaCube uses?
The game generates the procedural map on My Rust Server | ScalaCube at size 4,000 with seed 12345. Because size and seed match, the map is the same each time, and this page links to it on RustMaps.
Connecting
How do you get onto My Rust Server | ScalaCube?
Enter client.connect 88.198.230.54:2712 in the console after pressing F1 in Rust. Or use Launch Rust on this page to open Rust through Steam and connect automatically.
Server tags
what each one means
Published asmp20,ptrak,$r?,v2634,gmrust,cs167781,ts8
Game
gmrust
Game modeRust survival, played by the standard rules.
mp20
Max playersThe server holds 20 slots.
ts8
Group limitTeams are capped at 8, the game's standard setting.
v2634
ProtocolTo get in, your game needs to be on the same version: the protocol is 2634.
cs167781
BuildBuild number: 167781.
ptrak
NetworkingThe network layer is RakNet, standard for the game.
$r?
Region codeA region code is not set here.
Players now (cp), the queue (qp) and the wipe time (born) are in the tag string too; they change every few minutes and are shown at the top of the page. Flag meanings are Facepunch's.
A term to build on. Strongest in momentum (D); population is the one to work on (F).