Not ranked yet, so there is no place in the school to report.
Uptimehours on the list, last 48
unmarked
–
Not seen long enough to take a register.
Performanceserver fps, last 48 hours
unmarked
–
Did not answer our direct query, so this subject went unmarked.
Wipeskeeping the crowd after a wipe
unmarked
–
Too few wipes seen to mark this yet.
Momentumrank now against a week ago
unmarked
–
No rank a week ago to compare with.
Not enough figures yet to write a report. Check back after a few days on the list.
How it is marked: each subject is out of 100 from the figures on this page (population is the 7-day average against the slots, standing is 100 less the top share, uptime the hours of the last 48 it was seen, performance its fps against 60, wipes the share of its wipes that kept half their crowd, momentum its rank against a week ago with 50 for no change). The grade is their average: 95 and over is an A+, 90 an A, 85 an A−, 80 a B+, 75 a B, 70 a B−, 65 a C+, 60 a C, 55 a C−, 45 a D, under 45 an F.
Progress through the term
Its players, its performance and its rank, hour by hour and day by day. Dashed red lines are its wipes.
Players
No five-minute samples in the last two hours.
Every five minutes, from the Steam server list.
No hourly history yet.
Hourly average and peak, UTC.
AveragePeak
Daily average and peak, UTC.
Server performance
This server has not answered a direct query in the last 48 hours.
This server has not answered a direct query in the last 48 hours.
This server has not answered a direct query in the last 48 hours.
This server has not answered a direct query in the last 30 days.
This server has not answered a direct query in the last 30 days.
This server has not answered a direct query in the last 30 days.
This server has not answered a direct query in the last 60 days.
This server has not answered a direct query in the last 60 days.
This server has not answered a direct query in the last 60 days.
This server has not answered a direct query in the last 90 days.
This server has not answered a direct query in the last 90 days.
This server has not answered a direct query in the last 90 days.
48 hours: hourly readings. 30 to 90 days: one point a day, with the day's average and lowest fps, most entities and most memory. From asking the server directly; low fps and a climbing entity count mean lag.
Rank
daily · 1 is best
RankRank in region
Attendance: the wipe record
0 wipe days in the last 16 weeks
MTWTFSS
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
····
JulAugSepOct
W wiped that day F the force wipe · today. From the wipes in the table below.
Wipe schedule
Not enough wipes seen yet to tell when the next one is. Every server wipes at the monthly force wipe.
Wipes
newest first
Wiped
Peak
Crowd
Lasted
Players before
No wipe seen yet.
Peak: the most players in the first 48 hours. Crowd: whether every day of the wipe kept at least half that peak, or the day it fell below. A new world less than six hours after a wipe is a restart, not a wipe of its own.
Similar servers
classmates: the same kind of game, then region, group limit, rate and wipes
MonkeyCode Test Server leaves the region unpublished. Rust Server Score takes the server's word for its location and does not trace the hardware. You can connect at 103.156.242.194:28015.
How dependable is MonkeyCode Test Server, and is it online at the moment?
You cannot join now: MonkeyCode Test Server is offline, last seen 39 days 20 hours ago. It was up 0 of 168 hours over the last 7 full days, which is 0% of the time. It was first seen by Rust Server Score on 16 September 2026.
What Rust version is MonkeyCode Test Server on?
The server MonkeyCode Test Server is on Rust network protocol 2633 and build 162929 under Linux. You need the same protocol to join; Steam takes care of updating your game.
Wipe cycle
How frequently does MonkeyCode Test Server wipe its map?
There are too few wipes on record for MonkeyCode Test Server to show a rhythm. Next up is Thursday 5 November at 19:00 UTC, when the monthly force wipe takes every Rust server with it. 55 days 14 hours have passed since this world was made.
Population
Where does MonkeyCode Test Server sit among Rust servers?
In the top – of all ranked servers, MonkeyCode Test Server sits at #15,391 for player hours over the last seven days.
What does the population on MonkeyCode Test Server look like?
It has been 39 days 20 hours since MonkeyCode Test Server was last seen, and it is offline right now.
Lists and filters
What do MonkeyCode Test Server's tags stand for?
You'll see MonkeyCode Test Server tagged with gmrust (Game mode): Survival in the standard Rust style; mp10 (Max players): Its slot count is 10; ts8 (Group limit): The limit is 8 per team, the default the game ships with; v2633 (Protocol): The game protocol is 2633, so your game must match that version to join; cs162929 (Build): The game build is 162929; ptrak (Networking): RakNet handles it, the game's default network layer; $r? (Region code): No region code has been set; ^o (Oxide): Oxide (uMod) provides the plugin framework here; ^z (Modded): Because settings or plugins change how it plays, it is listed as Modded in the browser, which picks them up from the server. The top of this page also shows its current players, any queue, and when the world was created, all from its tags.
Which lists and filters on Rust Server Score show MonkeyCode Test Server?
Rust Server Score lists that include MonkeyCode Test Server: Modded Rust servers, graded. These filters bring it up on the server list: Type: Modded; Server tag: Modded ^z and Oxide ^o; Group limit: 5 or more.
Rules and settings
How is MonkeyCode Test Server set up, and what rules does it keep?
Nothing in the name of MonkeyCode Test Server states a gather rate. The group limit stays at the game's default of 8 players. It runs survival, gather and build and raid: the standard game. Raiding and PvP are both permitted. The server browser lists it as Modded: plugins or settings change how the game plays. Oxide plugins are running on it. VAC, Valve's anti-cheat, is enabled.
Can you tell me which map MonkeyCode Test Server uses?
MonkeyCode Test Server runs a procedural map, which the game generates.
Getting in
How should you connect to MonkeyCode Test Server?
Enter client.connect 103.156.242.194:28015 in the console after pressing F1 in Rust. Or use Launch Rust on this page to open Rust through Steam and connect automatically.
Server tags
what each one means
Published asmp10,ptrak,$r?,v2633,gmrust,cs162929,ts8,^o^z
Game
gmrust
Game modeSurvival in the standard Rust style.
mp10
Max playersIts slot count is 10.
ts8
Group limitThe limit is 8 per team, the default the game ships with.
v2633
ProtocolThe game protocol is 2633, so your game must match that version to join.
cs162929
BuildThe game build is 162929.
ptrak
NetworkingRakNet handles it, the game's default network layer.
$r?
Region codeNo region code has been set.
Mods and access
^o
OxideOxide (uMod) provides the plugin framework here.
^z
ModdedBecause settings or plugins change how it plays, it is listed as Modded.
Players now (cp), the queue (qp) and the wipe time (born) are in the tag string too; they change every few minutes and are shown at the top of the page. Flag meanings are Facepunch's.
Not enough figures yet to write a report. Check back after a few days on the list.