Not ranked yet, so there is no place in the school to report.
Uptimehours on the list, last 48
unmarked
–
Not seen long enough to take a register.
Performanceserver fps, last 48 hours
unmarked
–
Did not answer our direct query, so this subject went unmarked.
Wipeskeeping the crowd after a wipe
unmarked
–
Too few wipes seen to mark this yet.
Momentumrank now against a week ago
unmarked
–
No rank a week ago to compare with.
Not enough figures yet to write a report. Check back after a few days on the list.
How it is marked: each subject is out of 100 from the figures on this page (population is the 7-day average against the slots, standing is 100 less the top share, uptime the hours of the last 48 it was seen, performance its fps against 60, wipes the share of its wipes that kept half their crowd, momentum its rank against a week ago with 50 for no change). The grade is their average: 95 and over is an A+, 90 an A, 85 an A−, 80 a B+, 75 a B, 70 a B−, 65 a C+, 60 a C, 55 a C−, 45 a D, under 45 an F.
Progress through the term
Its players, its performance and its rank, hour by hour and day by day. Dashed red lines are its wipes.
Players
No five-minute samples in the last two hours.
Every five minutes, from the Steam server list.
No hourly history yet.
Hourly average and peak, UTC.
No daily history yet.
Daily average and peak, UTC.
Server performance
This server has not answered a direct query in the last 48 hours.
This server has not answered a direct query in the last 48 hours.
This server has not answered a direct query in the last 48 hours.
This server has not answered a direct query in the last 30 days.
This server has not answered a direct query in the last 30 days.
This server has not answered a direct query in the last 30 days.
This server has not answered a direct query in the last 60 days.
This server has not answered a direct query in the last 60 days.
This server has not answered a direct query in the last 60 days.
This server has not answered a direct query in the last 90 days.
This server has not answered a direct query in the last 90 days.
This server has not answered a direct query in the last 90 days.
48 hours: hourly readings. 30 to 90 days: one point a day, with the day's average and lowest fps, most entities and most memory. From asking the server directly; low fps and a climbing entity count mean lag.
Rank
daily · 1 is best
RankRank in region
Attendance: the wipe record
0 wipe days in the last 16 weeks
MTWTFSS
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
····
JulAugSepOct
W wiped that day F the force wipe · today. From the wipes in the table below.
Wipe schedule
Not enough wipes seen yet to tell when the next one is. Every server wipes at the monthly force wipe.
Wipes
newest first
Wiped
Peak
Crowd
Lasted
Players before
No wipe seen yet.
Peak: the most players in the first 48 hours. Crowd: whether every day of the wipe kept at least half that peak, or the day it fell below. A new world less than six hours after a wipe is a restart, not a wipe of its own.
Similar servers
classmates: the same kind of game, then region, group limit, rate and wipes
No region is published for Harry LAN PvE. Rust Server Score reports the location a server gives; it does not check where the machine actually is. You can connect at 122.161.242.8:28015.
How reliable is Harry LAN PvE, and is it up?
At this moment, Harry LAN PvE is offline; the last time it was seen was 43 days 16 hours ago. It was up 0 of 168 hours over the last 7 full days, which is 0% of the time. On 15 September 2026, Rust Server Score saw it for the first time.
Which Rust version is Harry LAN PvE running?
You will find Harry LAN PvE on Rust network protocol 2633 and build 163794, hosted on Windows. Steam updates your game for you, but you need the same protocol to join.
Wipe cycle
When does Harry LAN PvE wipe, and how often?
The record holds too few of Harry LAN PvE's wipes to tell its rhythm. The monthly force wipe reaches every Rust server, and the next one lands on Thursday 5 November at 19:00 UTC. It has been running its current world for 43 days 22 hours.
Population
Where does Harry LAN PvE place in the wider field of Rust servers?
In the top – of all ranked servers, Harry LAN PvE sits at #15,420 for player hours over the last seven days.
Is Harry LAN PvE a busy server?
Harry LAN PvE is offline at the moment; the last time it was seen was 43 days 16 hours ago.
Tags
What do Harry LAN PvE's tags stand for?
You'll see Harry LAN PvE tagged with gmrust (Game mode): Rust survival, played by the standard rules; mp10 (Max players): Its slot count is 10; ts8 (Group limit): The limit is 8 per team, the default the game ships with; v2633 (Protocol): To get in, your game needs to be on the same version: the protocol is 2633; cs163794 (Build): Build number: 163794; ptrak (Networking): RakNet handles it, the game's default network layer; $r? (Region code): No region code has been set; ^o (Oxide): Plugin framework: Oxide (uMod); ^z (Modded): Because settings or plugins change how it plays, it is listed as Modded in the browser, which picks them up from the server. The top of this page also shows its current players, any queue, and when the world was created, all from its tags.
Where does Harry LAN PvE appear in the Rust Server Score lists and filters?
Rust Server Score lists that include Harry LAN PvE: Modded Rust servers, graded. You can find it under these server-list filters: Type: Modded; Server tag: Modded ^z and Oxide ^o; Group limit: 5 or more.
Rules and settings
What settings and rules apply on Harry LAN PvE?
You will find no gather rate in the name of Harry LAN PvE. With no change from the game default, groups take up to 8 players. You get survival here, gather, build and raid, as in the standard game. You can raid other players and fight them. Plugins or settings change the game here, and the server browser lists it under Modded. Plugins on it number Oxide. You are covered by VAC, Valve's anti-cheat.
Which map is in play on Harry LAN PvE?
A procedural map, generated by the game, is what Harry LAN PvE runs.
Connecting
How should you connect to Harry LAN PvE?
To connect, start Rust, press F1, and type client.connect 122.161.242.8:28015. Or click Launch Rust here, which launches Rust through Steam and joins you.
Server tags
what each one means
Published asmp10,ptrak,$r?,v2633,gmrust,cs163794,ts8,^o^z
Game
gmrust
Game modeRust survival, played by the standard rules.
mp10
Max playersIts slot count is 10.
ts8
Group limitThe limit is 8 per team, the default the game ships with.
v2633
ProtocolTo get in, your game needs to be on the same version: the protocol is 2633.
cs163794
BuildBuild number: 163794.
ptrak
NetworkingRakNet handles it, the game's default network layer.
$r?
Region codeNo region code has been set.
Mods and access
^o
OxidePlugin framework: Oxide (uMod).
^z
ModdedBecause settings or plugins change how it plays, it is listed as Modded.
Players now (cp), the queue (qp) and the wipe time (born) are in the tag string too; they change every few minutes and are shown at the top of the page. Flag meanings are Facepunch's.
Not enough figures yet to write a report. Check back after a few days on the list.