Working its way up from the back of the class: #15,602 on player hours.
Uptimehours on the list, last 48
unmarked
–
Not seen long enough to take a register.
Performanceserver fps, last 48 hours
unmarked
–
Did not answer our direct query, so this subject went unmarked.
Wipeskeeping the crowd after a wipe
unmarked
–
Too few wipes seen to mark this yet.
Momentumrank now against a week ago
51/ 100
D
Moving up: up 351 places this week.
A term to build on.
Strongest in momentum (D); standing is the one to work on (F).
How it is marked: each subject is out of 100 from the figures on this page (population is the 7-day average against the slots, standing is 100 less the top share, uptime the hours of the last 48 it was seen, performance its fps against 60, wipes the share of its wipes that kept half their crowd, momentum its rank against a week ago with 50 for no change). The grade is their average: 95 and over is an A+, 90 an A, 85 an A−, 80 a B+, 75 a B, 70 a B−, 65 a C+, 60 a C, 55 a C−, 45 a D, under 45 an F.
Progress through the term
Its players, its performance and its rank, hour by hour and day by day. Dashed red lines are its wipes.
Players
No five-minute samples in the last two hours.
Every five minutes, from the Steam server list.
No hourly history yet.
Hourly average and peak, UTC.
AveragePeak
Daily average and peak, UTC.
Server performance
This server has not answered a direct query in the last 48 hours.
This server has not answered a direct query in the last 48 hours.
This server has not answered a direct query in the last 48 hours.
This server has not answered a direct query in the last 30 days.
This server has not answered a direct query in the last 30 days.
This server has not answered a direct query in the last 30 days.
This server has not answered a direct query in the last 60 days.
This server has not answered a direct query in the last 60 days.
This server has not answered a direct query in the last 60 days.
This server has not answered a direct query in the last 90 days.
This server has not answered a direct query in the last 90 days.
This server has not answered a direct query in the last 90 days.
48 hours: hourly readings. 30 to 90 days: one point a day, with the day's average and lowest fps, most entities and most memory. From asking the server directly; low fps and a climbing entity count mean lag.
Rank
daily · 1 is best
RankRank in region
Top 71% of all ranked servers. Ranked on player hours over the last seven days.
Attendance: the wipe record
0 wipe days in the last 16 weeks
MTWTFSS
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
·····
JulAugSepOct
W wiped that day F the force wipe · today. From the wipes in the table below.
Wipe schedule
Not enough wipes seen yet to tell when the next one is. Every server wipes at the monthly force wipe.
Wipes
newest first
Wiped
Peak
Crowd
Lasted
Players before
No wipe seen yet.
Peak: the most players in the first 48 hours. Crowd: whether every day of the wipe kept at least half that peak, or the day it fell below. A new world less than six hours after a wipe is a restart, not a wipe of its own.
Similar servers
classmates: the same kind of game, then region, group limit, rate and wipes
KELQOR WipeGuard QA leaves the region unpublished. Rust Server Score takes the server's word for its location and does not trace the hardware. You can connect at 186.54.168.241:28115.
Is KELQOR WipeGuard QA up, and how steady is its uptime?
At this moment, KELQOR WipeGuard QA is offline; the last time it was seen was 17 days 20 hours ago. For the last 7 full days, it was up 0 of 168 hours, or 0% of the time. It was first seen by Rust Server Score on 11 October 2026.
What Rust version is KELQOR WipeGuard QA on?
Rust network protocol 2634 and build 167398 on Windows is what KELQOR WipeGuard QA runs. Steam updates your game for you, but you need the same protocol to join.
Wipe schedule
On what schedule does KELQOR WipeGuard QA reset?
KELQOR WipeGuard QA has not had enough wipes recorded to reveal its rhythm. Next up is Thursday 5 November at 19:00 UTC, when the monthly force wipe takes every Rust server with it. The world it runs now was created 20 days 4 hours.
Player numbers
Where does KELQOR WipeGuard QA place in the wider field of Rust servers?
In the top 71% of all ranked servers, KELQOR WipeGuard QA sits at #15,602 for player hours over the last seven days.
Is KELQOR WipeGuard QA a busy server?
The last sighting of KELQOR WipeGuard QA was 17 days 20 hours ago, and it is offline right now.
Tags
How should you read the tags on KELQOR WipeGuard QA?
You'll see KELQOR WipeGuard QA tagged with gmrust (Game mode): This one runs plain Rust survival, with nothing altered; mp2 (Max players): The server holds 2 slots; ts8 (Group limit): Teams are capped at 8, the game's standard setting; v2634 (Protocol): Join only if your game runs protocol 2634; cs167398 (Build): The game build is 167398; ptrak (Networking): RakNet handles it, the game's default network layer; $r? (Region code): A region code is not set here; ^o (Oxide): Oxide (uMod) provides the plugin framework here; ^z (Modded): Plugins or settings alter the game, so it sits under Modded in the browser, which picks them up from the server. Its tags also carry today's player number, the queue length and the world's creation time, which you'll find at the top of this page.
Which lists and filters on Rust Server Score show KELQOR WipeGuard QA?
These Rust Server Score lists count KELQOR WipeGuard QA among them: Modded Rust servers, graded. You can find it under these server-list filters: Type: Modded; Server tag: Modded ^z and Oxide ^o; Group limit: 5 or more.
Rules and settings
How is KELQOR WipeGuard QA set up, and what rules does it keep?
The name of KELQOR WipeGuard QA gives no gather rate. The group limit stays at the game's default of 8 players. You get survival here, gather, build and raid, as in the standard game. Fighting and raiding between players are both allowed. The server browser lists it as Modded: plugins or settings change how the game plays. Oxide plugins are running on it. VAC, Valve's anti-cheat, is not enabled.
KELQOR WipeGuard QA runs which map?
A procedural map, generated by the game, is what KELQOR WipeGuard QA runs.
Getting in
How should you connect to KELQOR WipeGuard QA?
Enter client.connect 186.54.168.241:28115 in the console after pressing F1 in Rust. Or use Launch Rust on this page to open Rust through Steam and connect automatically.
Server tags
what each one means
Published asmp2,ptrak,$r?,v2634,gmrust,cs167398,ts8,^o^z
Game
gmrust
Game modeThis one runs plain Rust survival, with nothing altered.
mp2
Max playersThe server holds 2 slots.
ts8
Group limitTeams are capped at 8, the game's standard setting.
v2634
ProtocolJoin only if your game runs protocol 2634.
cs167398
BuildThe game build is 167398.
ptrak
NetworkingRakNet handles it, the game's default network layer.
$r?
Region codeA region code is not set here.
Mods and access
^o
OxideOxide (uMod) provides the plugin framework here.
^z
ModdedPlugins or settings alter the game, so it sits under Modded.
Players now (cp), the queue (qp) and the wipe time (born) are in the tag string too; they change every few minutes and are shown at the top of the page. Flag meanings are Facepunch's.
A term to build on. Strongest in momentum (D); standing is the one to work on (F).