On the class lists: C− (56), with population over 48 hours and no performance mark.
Players now0/ 100% full
7-day average0peak 2
Rank#6,128top 28%
Last wipe3d agono schedule published
Next wipe–no wipe seen yet
Subjects
Subject
Mark
Grade
Teacher's comment
Populationplayers against slots, 7-day average
3/ 100
F
A quiet classroom so far: 0 of 10 on average. Plenty of space to grow.
Standingrank on player hours
72/ 100
B−
Holds a respectable place: #6,128 on player hours.
Uptimehours on the list, last 48
96/ 100
A+
Excellent attendance: on the list 46 of the last 48 hours.
Performanceserver fps, last 48 hours
100/ 100
A+
Runs smoothly: 185 server fps on average.
Wipeskeeping the crowd after a wipe
unmarked
–
Too few wipes seen to mark this yet.
Momentumrank now against a week ago
unmarked
–
No rank a week ago to compare with.
A steady term.
Strongest in performance (A+); population is the one to work on (F).
How it is marked: each subject is out of 100 from the figures on this page (population is the 7-day average against the slots, standing is 100 less the top share, uptime the hours of the last 48 it was seen, performance its fps against 60, wipes the share of its wipes that kept half their crowd, momentum its rank against a week ago with 50 for no change). The grade is their average: 95 and over is an A+, 90 an A, 85 an A−, 80 a B+, 75 a B, 70 a B−, 65 a C+, 60 a C, 55 a C−, 45 a D, under 45 an F.
Progress through the term
Its players, its performance and its rank, hour by hour and day by day. Dashed red lines are its wipes.
Players
Every five minutes, from the Steam server list.
AveragePeak
Hourly average and peak, UTC.
AveragePeakWipe
Daily average and peak, UTC.
Server performance
Average fpsLowest fpsWipe
Most entitiesWipe
Most memory, MBWipe
Average fpsLowest fpsWipe
Most entitiesWipe
Most memory, MBWipe
Average fpsLowest fpsWipe
Most entitiesWipe
Most memory, MBWipe
48 hours: hourly readings. 30 to 90 days: one point a day, with the day's average and lowest fps, most entities and most memory, measured since 25 Oct. From asking the server directly; low fps and a climbing entity count mean lag.
Rank
daily · 1 is best
RankRank in region
Top 28% of all ranked servers. Ranked on player hours over the last seven days.
Attendance: the wipe record
0 wipe days in the last 16 weeks
MTWTFSS
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
···
JulAugSepOct
W wiped that day F the force wipe · today. From the wipes in the table below.
Wipe schedule
Not enough wipes seen yet to tell when the next one is. Every server wipes at the monthly force wipe.
Wipes
newest first
Wiped
Peak
Crowd
Lasted
Players before
No wipe seen yet.
Peak: the most players in the first 48 hours. Crowd: whether every day of the wipe kept at least half that peak, or the day it fell below. A new world less than six hours after a wipe is a restart, not a wipe of its own.
Similar servers
classmates: the same kind of game, then region, group limit, rate and wipes
Where in the world is Rust en casa | MX X3 | 10 jugadores?
Rust en casa | MX X3 | 10 jugadores leaves the region unpublished. Rust Server Score takes the server's word for its location and does not trace the hardware. You can connect at 201.108.80.58:28015.
Is Rust en casa | MX X3 | 10 jugadores up, and how steady is its uptime?
Right now, Rust en casa | MX X3 | 10 jugadores is online. The uptime it reports puts the last restart at about 1 hours ago. It was up 100% of the time over the last 2 full days, 48 of 48 hours. The first sighting by Rust Server Score was on 25 October 2026.
How well does Rust en casa | MX X3 | 10 jugadores run?
The average over the last 48 hours was 185 server fps, and it never went below 122. At its peak, it held 31,177 entities, including buildings, deployables and all else in the world. At its highest, it used 2,704 MB of memory. Players feel lag when fps drops and entities pile up.
Which Rust version is Rust en casa | MX X3 | 10 jugadores running?
You will find Rust en casa | MX X3 | 10 jugadores on Rust network protocol 2635 and build 168909, hosted on Windows. Steam updates your game for you, but you need the same protocol to join.
Resets
When does Rust en casa | MX X3 | 10 jugadores wipe, and how often?
The record holds too few of Rust en casa | MX X3 | 10 jugadores's wipes to tell its rhythm. On Thursday 5 November at 19:00 UTC the monthly force wipe resets every Rust server. The world it runs now was created 3 days.
Player numbers
Where does Rust en casa | MX X3 | 10 jugadores place in the wider field of Rust servers?
In the top 28% of all ranked servers, Rust en casa | MX X3 | 10 jugadores sits at #6,128 for player hours over the last seven days.
Is Rust en casa | MX X3 | 10 jugadores a busy server?
Rust en casa | MX X3 | 10 jugadores is showing 0 players right now, with 10 slots in total. It peaked at 2 and averaged 0 players over the last seven days. Over the last 48 hours, the peak hour was 03:00 UTC, averaging 1 players.
Lists and filters
What is meant by the tags on Rust en casa | MX X3 | 10 jugadores?
You'll see Rust en casa | MX X3 | 10 jugadores tagged with gmrust (Game mode): This one runs plain Rust survival, with nothing altered; mp10 (Max players): 10 slots are available; ts8 (Group limit): The limit is 8 per team, the default the game ships with; v2635 (Protocol): Join only if your game runs protocol 2635; cs168909 (Build): The game build is 168909; ptrak (Networking): RakNet handles it, the game's default network layer; $r? (Region code): A region code is not set here; ^o (Oxide): Plugin framework: Oxide (uMod); ^z (Modded): Plugins or settings alter the game, so it sits under Modded in the browser, which picks them up from the server. Its tags also carry today's player number, the queue length and the world's creation time, which you'll find at the top of this page.
Which Rust Server Score filters and lists feature Rust en casa | MX X3 | 10 jugadores?
These Rust Server Score lists count Rust en casa | MX X3 | 10 jugadores among them: 3x Rust servers, graded and Modded Rust servers, graded. You can find it under these server-list filters: Type: Modded; Server tag: Modded ^z and Oxide ^o; Group limit: 5 or more; Last wipe: In the last week; Gather rate: 3x.
Server rules
What settings and rules apply on Rust en casa | MX X3 | 10 jugadores?
Going by its name, Rust en casa | MX X3 | 10 jugadores runs 3x gather. The group limit stays at the game's default of 8 players. You get survival here, gather, build and raid, as in the standard game. You can raid other players and fight them. The server browser lists it as Modded: plugins or settings change how the game plays. Oxide plugins are running on it. You are covered by VAC, Valve's anti-cheat.
Can you tell me which map Rust en casa | MX X3 | 10 jugadores uses?
Rust en casa | MX X3 | 10 jugadores runs a game-generated procedural map at size 2,500, seed 20261024. A matching size and seed produce the same map, viewable on RustMaps from this page.
Getting in
How should you connect to Rust en casa | MX X3 | 10 jugadores?
To connect, start Rust, press F1, and type client.connect 201.108.80.58:28015. Or click Launch Rust here, which launches Rust through Steam and joins you.
Server tags
what each one means
Published asmp10,ptrak,$r?,v2635,gmrust,cs168909,ts8,^o^z
Game
gmrust
Game modeThis one runs plain Rust survival, with nothing altered.
mp10
Max players10 slots are available.
ts8
Group limitThe limit is 8 per team, the default the game ships with.
v2635
ProtocolJoin only if your game runs protocol 2635.
cs168909
BuildThe game build is 168909.
ptrak
NetworkingRakNet handles it, the game's default network layer.
$r?
Region codeA region code is not set here.
Mods and access
^o
OxidePlugin framework: Oxide (uMod).
^z
ModdedPlugins or settings alter the game, so it sits under Modded.
Players now (cp), the queue (qp) and the wipe time (born) are in the tag string too; they change every few minutes and are shown at the top of the page. Flag meanings are Facepunch's.
A steady term. Strongest in performance (A+); population is the one to work on (F).