Not ranked yet, so there is no place in the school to report.
Uptimehours on the list, last 48
unmarked
–
Not seen long enough to take a register.
Performanceserver fps, last 48 hours
unmarked
–
Did not answer our direct query, so this subject went unmarked.
Wipeskeeping the crowd after a wipe
unmarked
–
Too few wipes seen to mark this yet.
Momentumrank now against a week ago
unmarked
–
No rank a week ago to compare with.
Not enough figures yet to write a report. Check back after a few days on the list.
How it is marked: each subject is out of 100 from the figures on this page (population is the 7-day average against the slots, standing is 100 less the top share, uptime the hours of the last 48 it was seen, performance its fps against 60, wipes the share of its wipes that kept half their crowd, momentum its rank against a week ago with 50 for no change). The grade is their average: 95 and over is an A+, 90 an A, 85 an A−, 80 a B+, 75 a B, 70 a B−, 65 a C+, 60 a C, 55 a C−, 45 a D, under 45 an F.
Progress through the term
Its players, its performance and its rank, hour by hour and day by day. Dashed red lines are its wipes.
Players
No five-minute samples in the last two hours.
Every five minutes, from the Steam server list.
No hourly history yet.
Hourly average and peak, UTC.
AveragePeak
Daily average and peak, UTC.
Server performance
This server has not answered a direct query in the last 48 hours.
This server has not answered a direct query in the last 48 hours.
This server has not answered a direct query in the last 48 hours.
This server has not answered a direct query in the last 30 days.
This server has not answered a direct query in the last 30 days.
This server has not answered a direct query in the last 30 days.
This server has not answered a direct query in the last 60 days.
This server has not answered a direct query in the last 60 days.
This server has not answered a direct query in the last 60 days.
This server has not answered a direct query in the last 90 days.
This server has not answered a direct query in the last 90 days.
This server has not answered a direct query in the last 90 days.
48 hours: hourly readings. 30 to 90 days: one point a day, with the day's average and lowest fps, most entities and most memory. From asking the server directly; low fps and a climbing entity count mean lag.
Rank
daily · 1 is best
RankRank in region
Attendance: the wipe record
0 wipe days in the last 16 weeks
MTWTFSS
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
····
JulAugSepOct
W wiped that day F the force wipe · today. From the wipes in the table below.
Wipe schedule
Not enough wipes seen yet to tell when the next one is. Every server wipes at the monthly force wipe.
Wipes
newest first
Wiped
Peak
Crowd
Lasted
Players before
No wipe seen yet.
Peak: the most players in the first 48 hours. Crowd: whether every day of the wipe kept at least half that peak, or the day it fell below. A new world less than six hours after a wipe is a restart, not a wipe of its own.
Similar servers
classmates: the same kind of game, then region, group limit, rate and wipes
No region is published for MonkeyCode Test Server. Rust Server Score reports the location a server gives; it does not check where the machine actually is. You can connect at 212.107.28.58:28015.
How reliable is MonkeyCode Test Server, and is it up?
You cannot join now: MonkeyCode Test Server is offline, last seen 42 days 16 hours ago. For the last 7 full days, it was up 0 of 168 hours, or 0% of the time. It was first seen by Rust Server Score on 14 September 2026.
What Rust version is MonkeyCode Test Server on?
The server MonkeyCode Test Server is on Rust network protocol 2633 and build 162929 under Linux. To join, your game must use the same protocol; Steam handles the update.
Resets
When does MonkeyCode Test Server wipe, and how often?
MonkeyCode Test Server has not had enough wipes recorded to reveal its rhythm. On Thursday 5 November at 19:00 UTC the monthly force wipe resets every Rust server. The world it runs now was created 55 days 8 hours.
Population
Where does MonkeyCode Test Server sit among Rust servers?
In the top – of all ranked servers, MonkeyCode Test Server sits at #15,502 for player hours over the last seven days.
What does the population on MonkeyCode Test Server look like?
The last sighting of MonkeyCode Test Server was 42 days 16 hours ago, and it is offline right now.
Tags and filters
What do MonkeyCode Test Server's tags stand for?
The game's browser takes its cue from the tags MonkeyCode Test Server has set: gmrust (Game mode): This one runs plain Rust survival, with nothing altered; mp10 (Max players): 10 slots are available; ts8 (Group limit): The limit is 8 per team, the default the game ships with; v2633 (Protocol): The game protocol is 2633, so your game must match that version to join; cs162929 (Build): Build number: 162929; ptrak (Networking): This is RakNet: the network layer Rust normally uses; $r? (Region code): There is no region code on this server; ^o (Oxide): Oxide (uMod) provides the plugin framework here; ^z (Modded): Plugins or settings alter the game, so it sits under Modded. The top of this page also shows its current players, any queue, and when the world was created, all from its tags.
Which lists and filters on Rust Server Score show MonkeyCode Test Server?
These Rust Server Score lists count MonkeyCode Test Server among them: Modded Rust servers, graded. It shows under the following filters on the server list: Type: Modded; Server tag: Modded ^z and Oxide ^o; Group limit: 5 or more.
Rules and settings
Which rules does MonkeyCode Test Server enforce, and what are its settings?
Nothing in the name of MonkeyCode Test Server states a gather rate. The group limit stays at the game's default of 8 players. survival is the mode here, gather and build and raid: the standard game. Raiding and PvP are both permitted. Plugins or settings change the game here, and the server browser lists it under Modded. Plugins on it number Oxide. You are covered by VAC, Valve's anti-cheat.
Can you tell me which map MonkeyCode Test Server uses?
The game generates a procedural map for MonkeyCode Test Server.
Getting in
What is the way to join MonkeyCode Test Server?
Enter client.connect 212.107.28.58:28015 in the console after pressing F1 in Rust. Or use Launch Rust on this page to open Rust through Steam and connect automatically.
Server tags
what each one means
Published asmp10,ptrak,$r?,v2633,gmrust,cs162929,ts8,^o^z
Game
gmrust
Game modeThis one runs plain Rust survival, with nothing altered.
mp10
Max players10 slots are available.
ts8
Group limitThe limit is 8 per team, the default the game ships with.
v2633
ProtocolThe game protocol is 2633, so your game must match that version to join.
cs162929
BuildBuild number: 162929.
ptrak
NetworkingThis is RakNet: the network layer Rust normally uses.
$r?
Region codeThere is no region code on this server.
Mods and access
^o
OxideOxide (uMod) provides the plugin framework here.
^z
ModdedPlugins or settings alter the game, so it sits under Modded.
Players now (cp), the queue (qp) and the wipe time (born) are in the tag string too; they change every few minutes and are shown at the top of the page. Flag meanings are Facepunch's.
Not enough figures yet to write a report. Check back after a few days on the list.