Not ranked yet, so there is no place in the school to report.
Uptimehours on the list, last 48
unmarked
–
Not seen long enough to take a register.
Performanceserver fps, last 48 hours
unmarked
–
Did not answer our direct query, so this subject went unmarked.
Wipeskeeping the crowd after a wipe
unmarked
–
Too few wipes seen to mark this yet.
Momentumrank now against a week ago
unmarked
–
No rank a week ago to compare with.
Not enough figures yet to write a report. Check back after a few days on the list.
How it is marked: each subject is out of 100 from the figures on this page (population is the 7-day average against the slots, standing is 100 less the top share, uptime the hours of the last 48 it was seen, performance its fps against 60, wipes the share of its wipes that kept half their crowd, momentum its rank against a week ago with 50 for no change). The grade is their average: 95 and over is an A+, 90 an A, 85 an A−, 80 a B+, 75 a B, 70 a B−, 65 a C+, 60 a C, 55 a C−, 45 a D, under 45 an F.
Progress through the term
Its players, its performance and its rank, hour by hour and day by day. Dashed red lines are its wipes.
Players
No five-minute samples in the last two hours.
Every five minutes, from the Steam server list.
No hourly history yet.
Hourly average and peak, UTC.
AveragePeak
Daily average and peak, UTC.
Server performance
This server has not answered a direct query in the last 48 hours.
This server has not answered a direct query in the last 48 hours.
This server has not answered a direct query in the last 48 hours.
This server has not answered a direct query in the last 30 days.
This server has not answered a direct query in the last 30 days.
This server has not answered a direct query in the last 30 days.
This server has not answered a direct query in the last 60 days.
This server has not answered a direct query in the last 60 days.
This server has not answered a direct query in the last 60 days.
This server has not answered a direct query in the last 90 days.
This server has not answered a direct query in the last 90 days.
This server has not answered a direct query in the last 90 days.
48 hours: hourly readings. 30 to 90 days: one point a day, with the day's average and lowest fps, most entities and most memory. From asking the server directly; low fps and a climbing entity count mean lag.
Rank
daily · 1 is best
RankRank in region
Attendance: the wipe record
0 wipe days in the last 16 weeks
MTWTFSS
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
·······
····
JulAugSepOct
W wiped that day F the force wipe · today. From the wipes in the table below.
Wipe schedule
Not enough wipes seen yet to tell when the next one is. Every server wipes at the monthly force wipe.
Wipes
newest first
Wiped
Peak
Crowd
Lasted
Players before
No wipe seen yet.
Peak: the most players in the first 48 hours. Crowd: whether every day of the wipe kept at least half that peak, or the day it fell below. A new world less than six hours after a wipe is a restart, not a wipe of its own.
Similar servers
classmates: the same kind of game, then region, group limit, rate and wipes
You'll find no region listed by MonkeyCode Test Server. The location shown on Rust Server Score comes from the server itself, not from a lookup of the machine. Find it at 212.107.29.67:28015.
How reliable is MonkeyCode Test Server, and is it up?
The server is down: MonkeyCode Test Server is offline now, with the last sighting 40 days 20 hours ago. It was up 0% of the time over the last 7 full days, 0 of 168 hours. The first sighting by Rust Server Score was on 17 September 2026.
What Rust version is MonkeyCode Test Server on?
Rust network protocol 2633 and build 162929 on Linux is what MonkeyCode Test Server runs. To join, your game must use the same protocol; Steam handles the update.
Resets
When does MonkeyCode Test Server wipe, and how often?
There are too few wipes on record for MonkeyCode Test Server to show a rhythm. On Thursday 5 November at 19:00 UTC the monthly force wipe resets every Rust server. The world it runs now was created 55 days 8 hours.
Population
Where does MonkeyCode Test Server place in the wider field of Rust servers?
Over the last seven days, MonkeyCode Test Server has #15,398 for player hours, in the top – of all ranked servers.
Is MonkeyCode Test Server a busy server?
It has been 40 days 20 hours since MonkeyCode Test Server was last seen, and it is offline right now.
Tags
How should you read the tags on MonkeyCode Test Server?
You'll see MonkeyCode Test Server tagged with gmrust (Game mode): Rust survival, played by the standard rules; mp10 (Max players): Its slot count is 10; ts8 (Group limit): The limit is 8 per team, the default the game ships with; v2633 (Protocol): Join only if your game runs protocol 2633; cs162929 (Build): Build number: 162929; ptrak (Networking): The network layer is RakNet, standard for the game; $r? (Region code): A region code is not set here; ^o (Oxide): Oxide (uMod) provides the plugin framework here; ^z (Modded): Plugins or settings alter the game, so it sits under Modded in the browser, which picks them up from the server. At the top of the page you'll see the live player count, the queue and the world's age, taken from the tags.
Where does MonkeyCode Test Server appear in the Rust Server Score lists and filters?
Rust Server Score lists that include MonkeyCode Test Server: Modded Rust servers, graded. You can find it under these server-list filters: Type: Modded; Server tag: Modded ^z and Oxide ^o; Group limit: 5 or more.
Server rules
How is MonkeyCode Test Server set up, and what rules does it keep?
The name of MonkeyCode Test Server gives no gather rate. With no change from the game default, groups take up to 8 players. You get survival here, gather and build and raid: the standard game. Fighting and raiding between players are both allowed. The server browser lists it as Modded: plugins or settings change how the game plays. The plugin count runs to Oxide. VAC, Valve's anti-cheat, is enabled.
Can you tell me which map MonkeyCode Test Server uses?
The game generates a procedural map for MonkeyCode Test Server.
How to join
How should you connect to MonkeyCode Test Server?
Enter client.connect 212.107.29.67:28015 in the console after pressing F1 in Rust. Or use Launch Rust on this page to open Rust through Steam and connect automatically.
Server tags
what each one means
Published asmp10,ptrak,$r?,v2633,gmrust,cs162929,ts8,^o^z
Game
gmrust
Game modeRust survival, played by the standard rules.
mp10
Max playersIts slot count is 10.
ts8
Group limitThe limit is 8 per team, the default the game ships with.
v2633
ProtocolJoin only if your game runs protocol 2633.
cs162929
BuildBuild number: 162929.
ptrak
NetworkingThe network layer is RakNet, standard for the game.
$r?
Region codeA region code is not set here.
Mods and access
^o
OxideOxide (uMod) provides the plugin framework here.
^z
ModdedPlugins or settings alter the game, so it sits under Modded.
Players now (cp), the queue (qp) and the wipe time (born) are in the tag string too; they change every few minutes and are shown at the top of the page. Flag meanings are Facepunch's.
Not enough figures yet to write a report. Check back after a few days on the list.